FortiAnalyzer (BYOL) Provisioning Workflow on MTN Cloud
Overview
This guide covers the end-to-end provisioning of a FortiAnalyzer instance on the MTN Cloud Platform, delivered as a Bring Your Own Licence (BYOL) service. It provides step-by-step instructions for user creation, Security Group configuration, instance deployment, DNS configuration, first login and licence activation.
Why it matters:
- Centralised Logging and Reporting: FortiAnalyzer collects logs from your Fortinet devices and provides analytics and reporting from one place.
- Bring Your Own Licence: Use a valid Fortinet licence or a FortiCloud free-trial licence to unlock full functionality.
- Controlled Access: A dedicated Security Group lets you restrict access to FortiAnalyzer to only the addresses you trust.
Prerequisites
Before you begin, ensure you have:
- An MTN Cloud login with permissions to view the Infrastructure and Provisioning tabs.
- A created Resource Pool (Project).
- A created Network.
- A created Router (if required), with the network above attached to it.
- A planned deployment, including the resource specification, the network to place the instance on, the IP address, the required inter-communication (and so the Security Group rules), and whether a floating IP is needed.
Tip: If you do not see your networks or Security Groups when provisioning, contact support or refresh the portal.
Minimum System Requirements
The values below are Fortinet’s official published minimums for FortiAnalyzer-VM (8.0). On MTN Cloud, select a Plan and Volume that meet or exceed these figures. The recommended MTN catalog plan is shown for convenience.
| Resource | Minimum / Recommended |
|---|---|
| vCPU | 4 vCPU (minimum) |
| Memory (RAM) | 16 GB (minimum for 8.0) |
| Disk storage | 500 GB minimum (boot plus log/data disk), 2 volumes |
| MTN Catalog Plan | G4S8 (4 vCPU / 16 GB) |
| Interfaces | 1 interface (management) |
Important Note: FortiAnalyzer stores all collected logs, reports and its analytics database on a dedicated log/data disk, which is why 500 GB in total is the published minimum. Size the data disk to your expected log-retention needs. Higher log ingestion rates require more RAM, CPU and disk.
The Right Sequence
To deploy FortiAnalyzer efficiently, follow this sequence:
- Create a User (Linux/Windows): Add the required user under User Settings.
- Define Security Groups: Create a new Security Group specifying the ports needed for ingress and egress traffic. This Security Group can be added to the FortiAnalyzer instance (in addition to the default) after the instance has been created. The default Security Group provides basic functionality such as console access and instance health checks, and it is highly recommended that you use it during creation.
- Provision the FortiAnalyzer Instance: Deploy the instance, attach it to the appropriate network you have created, assign a floating IP, and apply the default Security Group. After provisioning, your defined or additional Security Group(s) can be added to the instance.
- Configure DNS and Log In: Set the DNS servers from the console, log in to the GUI and activate your licence.
Phase 1 — Create Linux/Windows User
Purpose: Allow logins to instances provisioned via the console, and manage resource ownership within MTN Cloud. Complete this phase only if it has not already been done.
- Log in to your user account.
- Navigate to User Settings by clicking the dropdown beside your name at the top right corner of the screen.

- Locate the Linux Settings section and assign the following:
- Username
- Password
- Confirm Password
- SSH Key: Optionally, select an SSH key entry if you have one.
- Repeat the same process for your Windows Settings. Scroll to the bottom of the page and click Save.

Phase 2 — Define Security Groups
Purpose: Control network access to (ingress) and from (egress) your FortiAnalyzer instance. Complete this phase only if a suitable Security Group does not already exist.
Scenario: You want only your laptop (with IP 200.200.113.15) to be able to access your FortiAnalyzer instance. All other devices should be blocked.
- Create a Security Group by following the Security Group Creation documentation, using these values:
- Name: Laptop-Access-Only
- Description: Allow secure remote access only from my laptop
- Scoped Cloud: MTNNG_CLOUD_AZ_1
- Add the following rules to the group. For each rule set Direction to Ingress, Rule Type to Custom Rule, Source Type to Network, Source to 200.200.113.15/32 (your laptop’s public IP) and Destination Type to Instance. Set the Destination Port Range to the same value as the port.
| Rule Name | Protocol | Port | Purpose |
|---|---|---|---|
| Allow-SSH-From-Laptop | TCP | 22 | SSH access |
| Allow-GUI-From-Laptop | TCP | 443 | GUI access over HTTPS |
| Allow-SNMP-From-Laptop | UDP | 161 | SNMP |
| Allow-ICMP-From-Laptop | ICMP | Not applicable | ICMP (ping). No port range is needed |
- Attach the Laptop-Access-Only group to your FortiAnalyzer instance in addition to the default Security Group.
Result: Only your laptop can access the FortiAnalyzer instance on the open ports. All other attempts are denied.
Phase 3 — Provision the FortiAnalyzer Instance (BYOL)
Purpose: Deploy your FortiAnalyzer instance in the MTN Cloud Console once your Security Group and network are ready.
Step 1 — Select the Catalog Item
- Navigate to Provisioning > Catalog.

- Search for and click MTN FortiAnalyzer (BYOL), then click Order.

Step 2 — Complete the Order Form
Complete the form as follows:
- Select the Group and Cloud where the FortiAnalyzer instance will be deployed (e.g., MTNNG_CLOUD_AZ_1).
- Choose the appropriate Environment (e.g., Development, Staging, Production).
- Select a Plan that meets the minimum CPU and memory requirements in the Minimum System Requirements table.
- Select the required Volume capacity (root minimum 250 GB). The total disk minimum is 500 GB across the boot and log/data volumes.
- Select the Resource Pool (Project) you created.
- From the list, select any Network you have created.
- Assign a Floating IP, based on the router selection made for the chosen network.
- Apply the Default Security Group first, then add the Security Group you created.

- Click Order Now.
Step 3 — Launch and Monitor
Click Order Now to launch. MTN Cloud will begin provisioning and will display the instance status once deployment is complete.

Phase 4 — Configure DNS and Log In
Purpose: Set the DNS servers from the instance console, then log in to the GUI and activate your licence.
Step 1 — Set the DNS Servers
Open the instance console and set the primary and secondary DNS servers to any of the following:
- 8.8.8.8
- 102.88.134.41
- 102.90.109.125
- 102.91.123.54
- 102.89.90.112
Run the following commands, replacing <dns> with your chosen addresses:
config system interface
edit port1
set dns-server-override disable
next
end
config system dns
set primary <dns>
set secondary <dns>
end
get system interface port1
get system dns
Step 2 — Log In and Activate the Licence
- To open the GUI, click the instance address in the Instances list and select the HTTPS link.

- To use the free trial, select Free Trial and log in with your registered FortiCloud username and password.

- After you authenticate with FortiCloud, you are redirected to the primary login page. Enter the default system credentials below. You will be prompted to change the password at your first sign-in:
- Username: admin
- Password: pAssword@123
- To activate the licence, have your licence registration code and the instance IP address ready.
- To upload a licence, click Upload License and add your .lic file.
Final Notes
- Documentation: Keep a record of IPs, credentials and assigned resources.
- BYOL: This is a Bring Your Own Licence instance. On first login FortiAnalyzer prompts for a licence. Use a valid Fortinet licence or a FortiCloud free-trial licence to unlock full functionality.
- Security Groups: Regularly review and update rules to follow the principle of least privilege.
- Reusability: You may reuse the Security Groups and username/password for subsequent Fortinet installations, based on your security considerations.