MTN Cloud Firewall Service Provisioning Guide
Service Name: MTN Cloud Firewall • Service Category: Security / Firewall • Document Version: v1.0
1.0 Overview
MTN Cloud Firewall provides a firewall service instance that can be provisioned through the MTN Cloud Service Catalog. The provisioning workflow creates a firewall instance with separate WAN and LAN network interfaces, a floating IP for external access, and the required Security Group configuration.
Why it matters:
- Provides a dedicated MTN Cloud Firewall instance.
- Separates WAN and LAN connectivity.
- Provides external access through an assigned floating IP.
- Establishes the initial security configuration required for firewall access.
1.1 Prerequisites
Before provisioning the MTN Cloud Firewall service, ensure that:
- Access to the MTN Cloud console is available.
- The required permissions are available to provision services from the Catalog.
- An internal/external network is available for the WAN interface.
- A private network is available for the LAN interface.
- A floating IP is available for assignment to the WAN interface.
- A Security Group can be created and assigned to the instance.
Tip: Ensure that the required networks and floating IP are available before beginning the provisioning process to avoid delays during instance configuration.
2.0 Provision the MTN Cloud Firewall Instance
Navigation: Authentication → Provisioning → Catalog → MTN Firewall
Select MTN Firewall from the MTN Cloud Service Catalog.
Configure the following:
- Plan: Small, Medium, or Large
- Volume: Fixed 50 GB
- Security Group: Default and the Security Group configured in Section 5.0
- Network: Minimum of 2 networks
- Floating IP: Selected
- Advanced Options: Select Skip agent install
Click Order Now to begin provisioning.
3.0 Configure Network Interfaces
The MTN Cloud Firewall instance requires a minimum of two network interfaces. The WAN interface must be configured as the primary interface.
3.1 Configure the WAN Interface
Configure Network Interface 1 as follows:
- Network: Internal/External Network
- IP Mode: DHCP
- Primary Interface: Yes
- Assign Floating IP: Yes
The WAN interface provides the external connectivity required by the firewall instance.
3.2 Configure the LAN Interface
Configure Network Interface 2 as follows:
- Network: Private Network
- Example IP: 192.168.1.191
- IP Mode: DHCP

Important note: The WAN interface must be configured as the primary interface. The source identifies Network Interface 1 as the WAN interface and Network Interface 2 as the LAN interface.
4.0 Provision the Firewall Instance
After configuring the required network interfaces:
- Click Complete.
- Wait approximately 5–10 minutes for provisioning to complete.
- Note the Floating IP assigned to the firewall instance.
Tip: Record the assigned floating IP after provisioning. It is required for initial access to the firewall service instance.
5.0 Configure the Security Group
Create a new Security Group for the MTN Cloud Firewall instance. Add rules for:
- Port 22
- Port 443
- ICMP
- All (0.0.0.0)
Assign the Security Group to the firewall instance.

6.0 Verify Initial Access
Use the default credentials to access the MTN Cloud Firewall instance, if they have not been changed.
- Username: admin
- Password: cloud
After initial access, the user can create a new user or change the default administrator password.
Use the assigned floating IP to access the MTN Cloud Service Instances Console.
6.1 Verify SSH Access
Verify that SSH access to the firewall instance works successfully.

6.2 Verify Web GUI Access
Verify that the web GUI is accessible and functioning correctly.

Important note: The source specifies the credentials admin/cloud as the default credentials if they have not been changed. Change the default administrator password or create a new user after initial access, as appropriate.